F30 18ga Brad Nailer for Decorative and Furniture Trim

Basic Info

Model NO.	F30
Air Wrench Type	Pulse pneumatic wrench
Pneumatic Drill Range	Construction Machinery
Brand	Kya
Degree of Automation	Semi-automatic
Screwdriver Startup Mode	Under pressure
Condition	New
Customized	Customized
Weight	1.1kgs
Load Capacity	100 Nails
Operating Pressure	60-100psi(4-7bar)
Nail Type	Brad Nails
Nail Length	10-30mm
Nail Shank	1.05mm
Nail Head	1.3mm
Shank Type	Smooth, Ring, Screw
Business Type	Manufacturer and Trading Company
OEM Service	Available
Transport Package	Carton
Specification	197x57x235mm
Trademark	KYA
Origin	China
HS Code	84671900
Production Capacity	5000 Sets/Month

Packaging & Delivery

Package size per unit product 25.70cm * 10.70cm * 29.50cm Gross weight per unit product 2.000kg

Product Description

China KYA Pneumatic Brad Nailer

Product overview:

18 Gauge Pneumatic Brad Nailer F30

18 Gauge Pneumatic Brad Nailer F30 ideal for a wide variety of finish applications, Designed with a aluminum body for strength and lightweight use.

Tool-free depth-of-drive adjustment.

Tool-free jam release.

Drives 3/8 in. to 1-3/16 in. 18 guage F brad nails.

High capacity magazine holds up to 100 nails.

Lightweight aluminum alloy body weighs only 2.4 pounds.

Product description:

Model:	18 Gauge Pneumatic Brad Nailer F30
Air Tool Type:	Air Nailer
Tool Diamensions:	197mm x 57mm x 235mm
Net Tool Weight:	1.10kgs(2.42 lbs)
Body Material:	Aliminum Body
Operate Pressure:	60-100psi (4-7bar)
Load Capacity:	100 nails
Nails Type:	18 Guage F Brad Nails
Nails Head Diameter:	0.075"(1.9mm) x 0.050"(1.3mm)
Nails Shank Diameter:	1.05mm
Nails Length:	3/8"(10mm)~1-3/16"(30mm)

Suitable nails:

18 Guage F Brad Nails

Nails Head Diameter:0.075"(1.9mm) x 0.050"(1.3mm)

Nails Shank Diameter:1.05mm

Nails Length:3/8"(10mm)~1-3/16"(30mm)

Features:

Lightweight and well balanced for easy operating.

Superior power with hardened one piece piston for professional application.

Open nose design for easy extraction of a jammed nail.

Tool free depth of drive adjustment for flush or counter sunk drive into varying material.

Hardened claw tip,reduces wear and limits slippage when driving at a stand angle.

Apply:

Decorative and furniture trim.

Picture frame assembly.

Interior and exterior trim.

Cabinet work.

Upholstery and bedding.

Crafts.

After-sale service:

No.	Symptom		Problems	Solutions
1	Air Leak	Air leak in the cylinder cap when tools don't work	1.Loose head valve piston seal or o-rings .	Check and replace the head valve piston set
			2.Worn or damaged o-ring or cylinder cap gasket under cylinder cap	Check and replace o-ring or cylinder cap gasket under the cylinder cap
		Air leak in Trigger area when tools don't work	1.Damaged o-ring in trigger valve	Check and replace o-ring
			2.Damaged o-ring in trigger valve stem	Check and replace o-ring
			3.Dirt in the trigger valve	Check and clean the trigger valve
		Air leak in cylinder cap when tools are working	1.Damaged head valve piston o-rings	Check and replace o-rings
			2.Damaged seal under cylinder cap	Check and replace seal
		Air leak in nose when tools are working	1.Worn or damaged bumper	Check and replace bumper
			2.Loose driver(piston unit) thread	Check and replace driver(piston unit)
		Air leak in Trigger area when tools are working	1.Worn or damaged trigger valve head	Check and replace trigger valve head
			2.Damaged head valve piston o-rings	Check and replace head valve piston o-rings
2	Failed to get driver(piston unit) back to the correct position completely.		1.The driver(piston unit) is not straight or the driver guide(nose) is wrong assembled.	Straighten the driver(piston unit) or verify driver guide(nose) and magazine
			2.Worn or damaged nozzle	Check and replace nozzle
			3.The space between piston o-ring and cylinder is too tight.	Check if the cylinder is adequate lubrication or replace the o-ring on the piston.
3	Work weakly and sluggishly		1. Worn or damaged piston o-ring	Check and replace piston o-ring
			2.Inadequate lubrication for head valve piston o-rings or too tight head valve piston o-rings	Place 2 or 6 drops of oil on o-rings or replace head valve piston o-rings
			3.Dirt in the nozzle	Check and clean the nozzle
4	Tool jams frequently		1.Damaged or Worn driver (piston unit)	Check and replace driver (piston unit)
			2.Damaged or Worn driver guide (nose)	Check and replace driver guide (nose)
			3.Driver guide cover is bent,so the space between driver guide cover and driver guide is too big	Check and replace driver guide cover
5	Nail can not be shot		1. Driver (piston unit) can't return to the correct position.	Refer to no. 1 Symptom
			2.Driver guide(nose) can not match magazine well	Check and correct the position between driver guide(nose) and magazine
			3.Worn or damaged nail pusher compression spring	Check and replace nail pusher compression spring

FAQ:

1
Q:Do you have your own production factory?
A:Yes,we not only have our own factory,We also have a cooperative relationship with more than one hundred factories in China

2
Q: Can you send us samples?
A: We are pleased to send you the sample to test the quality and market.3
Q: About your products, could you do it OEM?
A: Yes, OEM service is available.4
Q: Do you also provide spare parts of pneumatic tools?
A: Once we confirm the models you'd like to order, we will send you the diagram for checking and also suggest you some easy-broken parts.5
Q: For the product, could you spray other color of painting?
A: Yes, color can be customized.6
Q: What's the delivery time?
A: It usually takes about 20-30 working days to produce one order.7
Q: How is the payment terms?
A: Normally T/T 30% in advance and T/T 70% before shipment.8
Q: Can I mix different models in one container?
A: Yes, different models can be mixed in one container, but the quantity of each model should not be less than MOQ.9
Q: How does your factory do regarding quality control?
A: We always pay great attention to quality control from the very beginning and every product was tested piece by piece before delivery.10
Q: Do you have quality certification?
A: Yes, we have CE, SGS,ISO, ect.

About us:Why choose KYA?

1.Short production time:Our company have established the strong partner-ship with over 100 factories and We have our own factory.2.Reasonable prices and High quality:Quality and prices are our focus because we know what you will care at most.3.Satisfactory after-sales service: Middle time production report with photos will be sent to you and also reconfirm accomplished date. We will establish close contact with you.Any problem you will get reply at the first time. 4.Free samples: Free samples available at any time.You can get competitive prices from us because we possess big manufacturing relationship in China.