Cn80 Pneumatic Power Wire Collated Coil Nailer

Basic Info

Model NO.	CN80
Degree of Automation	Semi-automatic
Screwdriver Startup Mode	Under pressure
Condition	New
Customized	Customized
Weight	3.98kgs (Aluminum Body) 3.68kgs (Magnesium Body
Load Capacity	225-300PCS Nails
Operating Pressure	5-8.3kgs/Cm2 (70-120psi )
Fasteners Length	50mm - 83 mm
Shank	2.5mm - 3.3 mm
Nails Head	6.0mm-8.0mm
Power Source	Pneumatic
Dimensions	362 X 132 X 307mm
Business Type	Manufacturer and Trading Company
OEM Service	Available
Transport Package	According to Your Requirements
Specification	CE SGS
Trademark	KYA
Origin	China
HS Code	84671900
Production Capacity	1000 Sets Per Month

Product Description

Tool Specification:

MODEL	CN80 (Aluminum body/Magnesium body)
FIRING METHOD	Contact trip
FIRING MODE:	Bump fire
WEIGHT:	3.98kgs (Aluminum body) 3.68kgs (Magnesium body)
DIMENSIONS:	362 x 132 x 307mm
OPERATING PRESSURE:	5-8.3kgs/cm2 (70-120psi )
Customized	Customized is available if you provide a drawing or sample
OEM Service	Available

Nail Specification:

15° Flat wire welded coil nails
LENGTH:	50mm - 83 mm
SHANK DIAMETER:	2.5 - 3.3 mm
HEAD:	6.0-8.0mm
SHANK TYPE:	Smooth, ring & screw

Applications:Assembly and repair of pallets,drums,export wooden boxes.CratingWooden FencingGeneral construction applications including:siding,decking and sheathing
Features:
Ergonomic design, well balanced Extra heavy-duty, die cast aluminum construction
Big load capacity
Powerful, rapid nailing performance
Comfortable rubber grip
Light weight
Service and Repars:

No.	Symptom		Problems	Solutions
1.1	Air Leak	Air leak in the cylinder cap when tools don't work	1.Loose head valve piston seal or o-rings .	Check and replace the head valve piston set
			2.Worn or damaged o-ring or cylinder cap gasket under cylinder cap	Check and replace o-ring or cylinder cap gasket under the cylinder cap
1.2		Air leak in Trigger area when tools don't work	1.Damaged o-ring in trigger valve	Check and replace o-ring
			2.Damaged o-ring in trigger valve stem	Check and replace o-ring
			3.Dirt in the trigger valve	Check and clean the trigger valve
1.3		Air leak in cylinder cap when tools are working	1.Damaged head valve piston o-rings	Check and replace o-rings
			2.Damaged seal under cylinder cap	Check and replace seal
1.4		Air leak in nose when tools are working	1.Worn or damaged bumper	Check and replace bumper
			2.Loose driver(piston unit) thread	Check and replace driver(piston unit)
1.5		Air leak in Trigger area when tools are working	1.Worn or damaged trigger valve head	Check and replace trigger valve head
			2.Damaged head valve piston o-rings	Check and replace head valve piston o-rings
2	Failed to get driver(piston unit) back to the correct position completely.		1.The driver(piston unit) is not straight or the driver guide(nose) is wrong assembled.	Straighten the driver(piston unit) or verify driver guide(nose) and magazine
			2.Worn or damaged nozzle	Check and replace nozzle
			3.The space between piston o-ring and cylinder is too tight.	Check if the cylinder is adequate lubrication or replace the o-ring on the piston.
3	Work weakly and sluggishly		1. Worn or damaged piston o-ring	Check and replace piston o-ring
			2.Inadequate lubrication for head valve piston o-rings or too tight head valve piston o-rings	Place 2 or 6 drops of oil on o-rings or replace head valve piston o-rings
			3.Dirt in the nozzle	Check and clean the nozzle
4	Tool jams frequently		1.Damaged or Worn driver (piston unit)	Check and replace driver (piston unit)
			2.Damaged or Worn driver guide (nose)	Check and replace driver guide (nose)
			3.Driver guide cover is bent,so the space between driver guide cover and driver guide is too big	Check and replace driver guide cover
5	Nail can not be shot		1. Driver (piston unit) can't return to the correct position.	Refer to no. 1 Symptom
			2.Driver guide(nose) can not match magazine well	Check and correct the position between driver guide(nose) and magazine
			3.Worn or damaged nail pusher compression spring

FAQ:1
Q:Do you have your own production factory? A:Yes,we not only have our own factory,We also have a cooperative relationship with more than one hundred factories in China2
Q: Can you send us samples? A: We are pleased to send you the sample to test the quality and market. 3
Q: About your products, could you do it OEM? A: Yes, OEM service is available. 4
Q: Do you also provide spare parts of pneumatic tools? A: Once we confirm the models you'd like to order, we will send you the diagram for checking and also suggest you some easy-broken parts. 5
Q: For the product, could you spray other color of painting? A: Yes, color can be customized. 6
Q: What's the delivery time? A: It usually takes about 20-30 working days to produce one order. 7
Q: How is the payment terms? A: Normally T/T 30% in advance and T/T 70% before shipment. 8
Q: Can I mix different models in one container? A: Yes, different models can be mixed in one container, but the quantity of each model should not be less than MOQ. 9
Q: How does your factory do regarding quality control? A: We always pay great attention to quality control from the very beginning and every product was tested piece by piece before delivery. 10
Q: Do you have quality certification? A: Yes, we have CE, SGS,ISO, ect.
About Us:Contact Us: